ARDUINO UNO R3 ATMega328P USB COMPATIBLE DEVELOPMENT BOARD

The Arduino UNO is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analogue inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.


Upgraded revision featuring stronger reset circuit and CH431A USB


Features:

This upgraded model is completely compatible with original Arduino UNO.
Microcontroller: ATmega328P
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analogue Input Pins: 6
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 32 KB (ATmega328P) of which 0.5 KB used by bootloader
SRAM: 2 KB (ATmega328P)
EEPROM: 1 KB (ATmega328P)
Clock Speed: 16 MHz
Use only if you are having problems
USB Driver Install Steps:

USB driver download (Windows only)
Click Here to Download
Install the downloaded USB Driver, then plug UNO development board, the driver will automatically install
Select the new added COM port number which can be found in the Device Manager Panel;
Now you can run the Arduino IDE and communicate with the board.

Contents:
· 1x UNO R3 Arduino Compatible Board

Report error