UNIT PLASMA INVERTER TECNOMEC IRIN 125 A 400V (III) 125 Amp LENGTH 8m

-Plasma cutting machine with very high cutting performance.
- Separating cuts in steel up to 65 mm.
- Above average duty cycle allows prolonged, intensive use of the system without switching off due to overload.

-Materials suitable for cutting:
• Steel
• Stainless steel
• Aluminium
• Copper
• Brass
• Cast materials
• Galvanised material

-Mains voltage: 3 x 400 V (± 15 %)
-mains frequency: 50 Hz
-Mains fuse: 32 A (slow-blowing)
-Max. power consumption: 26,0 kVA
-Effective power consumption: 22,2 kVA
-Adjustment range: 5 – 125 A
-Duty cycle: 80 %: 125 A
-100 %: 110 A
-Arc ignition: Ignition without H.F.
-Power factor: 0,8
-Device cooling: F (fan)
-Torch cooling: Air
-Aftercooling time of the cooling air: 30 sec.
-IP rating: IP 23 S
-power plug: CEE 400 V/ 32 A, 3p+N+PE
-Insulation class: F (155 °C)
-Operating temperature: -10°C to +40°C
-Length: 850 mm
-Width: 280 mm
-Height: 500 mm
-Weight: 41 kg
-Air flow: 200 l/min.
-Working pressure: 5,0 – 6,0 bar
-Permissible supply pressure: 5,5 – 8,0 bar
-Parting cut: Steel: 65 mm
-Stainless steel: 50 mm
-Aluminium: 50 mm
-Quality cut: Steel: 50 mm
-Stainless steel: 45 mm
-Aluminium: 40 mm

Report error