CAR HEAD UP HUD WITH OBD2 INTERFACE AND ANTILLISTIC BASE

-.Automatic adaptation models, in line with OBDII or EUOBD models Plug Ready to use (car auto diagnostic system)
-Vehicle speed, engine speed, water temperature (voltage / throttle position / ignition advance angle / 100 km Acceleration), fuel consumption, mileage, low fuel tips, rest tips, engine failure
-Displayed simultaneously
-Normal display mode, high-speed display mode, automatic display mode can be chosen
-Free switch. km miles freely switch, which greatly facilitates Inch
-Suitable size.5.5inch display area, more conducive to the data read
-Switcher, launch vehicle, lorry shutdown, effectively protect the car battery; while preserving the hand Switch machine way more beneficial to control the HUD
-Flexible alarm mode. speed single-stage and four alarm modes, more conductive to driving safety
-Speed alarm, there is conducive to the timely shift to achieve the purpose of the saving the novice also has a special Significance
-Flexible brightness adjustment. automatic and manual brightness adjustment mode, not dazzling
-SIZE: 14*85*147mm, 5.5 Inch Display
-Display color: white color, white+yellow color, yellow+blue color
- Parameter value: show the value with the units of kilometers, miles and engine speed.
- OBDII port: connect the car and HUD.
- Fuel icon: flash when the fuel is not enough to drive 100km.
- Engine failure: flash when vehicle’s engine has problems.
- Engine speed: show the state of engine speed.
- Engine speed icon: indicate the parameter value of engine with units of 1000r. It will flash when engine speed is alarming.
- Speed alarm: flash when speed exceeds the preset values.
- Rest tips: flash when drive continuously for more than 4 hours with HUD starting.
- Sound switch: light when voice alarm is opened.
- Fuel consumption icon: show fuel consumption is calculating.
- Fuel parameter value: show the consumption of fuel in recent driving.
- Dial button: multi-function switch, you can dial to left or right, you can enter into setting mode by long press. And also has the ability to decrease or increase fuel.
- Fuel consumption per hour: show oil mass consumption per hour in driving.
- Light sensor: sense the external light intensity and adjust the HUD’s brightness to adapt to environment automatically.
- Fuel consumption per 100km: show the fuel consumption per 100km in driving.
- Voltage, throttle valve, water temperature, ignition advance angle and acceleration per 100km: voltage shows the vehicle’s voltage; throttle valve shows the size of itself; water temperature shows the temperature of vehicle cooling fluid; ignition advance angle shows the angle of twist in firing, it’s also a mark of engine’s efficiency. Acceleration per 100km shows performance of the vehicle’s acceleration per 100km.
- Seconds: show the unit of acceleration per 100km.
- Parameter value: show parameter value of Voltage, throttle valve, water temperature, ignition advance angle and acceleration per 100km.
- Mileage: light when the fuel only sustains 100km.
- Reel per minute: show the unit of engine speed if you multiply the parameter value with 10.
- Kilometer per hour: show the unit of speed.
- Mile per hour: show the unit of speed.

1 x Car HUD Head Up Display
1 x Transfer Cable
1 x Reflective Film
1 x Anti-slip Mat
1 x User Manual

Report error