12V DIGITAL LED THERMOSTAT TEMPERATURE RELAY CONTROL MODULE

How to Use:
-Connect the power supply and the load, then you can supply to the controller.
-It displays the measured temperature, press SET key, the display temperature flashing, press"+" "-" to set the desired temperature.
After finished, press SET to confirm and back.
-Now the controller automatically performs the relay by setting off.
-This temperature controller output is 10A relay, meeting various
high-power loads, please make sure the wires are connected
correctly.
-Indicator, LED State Instruction:
-Indicator: OFF indicates the relay is switched off; ALWAYS -indicates the relay is closed.
-LED: shows LL means the sensor opens; shows HH means it's out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.
Specifications:
-Temperature Range: -50~110°C
-Resolution: 0.1°C(-9.9~99.9°C), 1°C(Other Ranges)
-Accuracy: 0.1°C
-Refresh Rate: 0.5s
-High Temperature Protection: 0~110°C
-Input Power: DC 12V
-Static Current: ≤35mA, Attract Current: ≤65mA
-Measurement Input: NTC(10K 0.5%) Waterproof Type Sensor
-Output Range: 1 Channel 10A Relay Output
-Environment: -10~60°C， Humidity: 20%-85%
-PCB Board Size: 48 * 40mm / 1.9 * 1.57in
-Package Weight: 26g / 0.93oz

Report error